Details
Avocent's Secure Power Control (SPC) Systems can only be used with Avocent or Cyclade Switches and DSView software.
- NOTE: Please visit Stand Alone Power Management if you need this capability and are not using DSView software.
- SPC units are available in both horizontal and vertical mount models. Here are just a few —
8 & 16 Port Vertical 115V, 20A w/Nema 5-20P & Nema 5-15R Outlet
- 4 Port Vertical 115V, 15A w/Nema 5-15P Plug & Nema 5-15R Outlet
- 8 Port Horizontal 208V, 15A w/Nema 6-15P Plug & IEC C-13 Outlet
- 8 Port Horizontal 115V, 30A w/Nema L5-30P Plug & Nema 5-15R Outlet
- 8 & 16 Port Vertical 208V, 30A w/Nema L6-30P Plug & IEC C-13 Outlet
- 16 Port Vertical 115V, 30A w/Nema L5-30P Plug & IEC C-13 Outlet
Avocent Remote ReBoot PDU
Recycle Power from Your Desktop with DSView Interface
The SPC (Secure Power Control), power strip is available in various amperage and voltage combinations, with either a straight blade or twist lock plug.
- Requires DSView 3 Software
- Intelligent Power Management. Individual, addressable power outlets let you remotely reboot devices from any location in the data center or across the globe
- Integrated Power Management. Access to SPC power control device from DSView 3 software provides built-in support for servers with multiple power supplies and reduces the possibilities of inadvertently switching off the wrong server / target device
- Ease of Use. Available in horizontal and vertical mountable 16 outlet models. (Also available in 4 and 8-outlet models, with configurable port grouping and naming, multi-port commands and enhanced administration)
- On / Off Power Indicators. DSView 3 software lets you easily view the SPC devices power outlet on / off status without entering the server room / data center
- Power-up Sequencing. Avoids branch circuit overload due to inrush current on powering-up the SPC appliance
- Naming Associations. Users can create an association between a server name and specific SPC outlet port(s)
- Redundant Power Supply Configurations. Single connect and click power control of dual / multiple target devices that are powered from independent branch circuits / power sources
- Power Monitoring. Dynamically measures and reports total input current load and indicates on / off state for every port
- Security. Port specific and command specific access control
- Energy Efficient. Power-on sequencing eliminates inrush current overload, which lets you maximize the number of devices on a single circuit
- Click and Connect Access. When used with the Avocent DSView 3 software interface, the SPC device lets you access power to virtually any connected data center device
- Local and Remote Power Load Measurement. Lets you hot plug additional SPC power control devices without the risk of overloading the branch circuit
Note: DSView 3 software is sold separately.
