Details
Overview of Some Technical Specs
- There are NO Fuses in any unit! Did you know that a datacenter with "Fused" 30A/3P in 100 enclosures would have 2,400 fuses to manage!
- Mount with tool-less keyhole mounting so they will work in ANY cabinet (including APC!)
- Local 8 Channel Ammeter — read input and output values &mdash (see pictureabove) — and/or RS232 monitoring
- The ONLY 60A Vertical PDU manufactured
- The only fully compliant RoHS products
- Configurations available for literally every country worldwide can be ordered through us
- Family Groups
- High density vertical units from 5 to 8.6kW for standard and blade servers
- Ultra slim (.75") from 15A to 30A (120V) for LAN furniture, some with optional dual feed
- 19" rackmount units from 15A to 60A (120V, 208V, 208V/3Phase. With optional dual feed and surge protection
- High-density, dual-circuit vertical PDUs ranging from 20A to 30A (120V, 208V, 208V/3 Phase) optimizes A-B feed requirements
- High-density PDUs (30A and 60A at 208V) support blade servers, large network switches and mid-sized servers. Optional satellite units, which plug into the primary unit, support smaller equipment
High Density Fault Tolerant PDUs
Power at the rack is a critical issue. A 15A/120V powerstrip is not capable of supporting the power consumption of the average server let alone a blade server or some of the newer dual and power supplies.
The engineers who designed these understand the needs in the data center...
• The ammeter can be read from 12 feet
and through the enclosure perforation
• Where getting 8kW or 10kW or even 17kW
to the rack is NOT an issue
• There is even a 2U 60A/10kW unit designed for
quad power supply servers
There are over 45 models of high power density PDUs, with 15 of them rated for Blade Servers.
Give us a call. Let us help you find the unit(s) that best address your requirements! We are happy to provide Technical Spec Sheets and Engineering Drawings!!
